[Vwdiesel] Head rebuild questions

[cass]

the shop i used did .
why not call whomever your going to use ,and ask them/double check?
:o)
  ----- Original Message ----- 
  From: Shawn Wright 
  To: vwdiesel at vwfans.com 
  Sent: Friday, June 11, 2004 7:38 AM
  Subject: [Vwdiesel] Head rebuild questions


  I have talked to two recommended shops about rebuilding my 1.6TD head, 
  and both have quoted me around $200 CDN for a valve grind, and installing 
  new guides and seals (parts not included). Is there anything else I'm 
  missing? Do these places normally flush the head out after the valve grind to 
  remove any crud? I assume they must...

  I have used fine steel wool to remove the silicone from the top sealing 
  surface of the head, and there are now some steel particles in the head. I'm 
  wondering if I should try to flush it how somehow, or just let the shop do it. I'm 
  hesitant to apply water to a head with valves still installed in case I get rust 
  starting, and I don't have anything else to flush it with.
  --
  Shawn Wright
  http://Zuiko.sls.bc.ca/swright
  ~This message sent by Pegasus Mail, the safe E-Mail alternative~
  "Friends don't let friends use Outlook"

  _______________________________________________
  Vwdiesel mailing list
  Vwdiesel at vwfans.com
  http://www.audifans.com/mailman/listinfo/vwdiesel