[Vwdiesel] AC Removal

[LBaird119 at aol.com]

  The bolt SHOULD be able to be removed with the compressor pulley in 
place but if someone went to a LOT of work to be sure it can't....
  I haven't looked at one closely but likely there's a nut which pulles 
the pulley/bearing assembly onto the tapered(?), keyed shaft upon 
assembly.  Remove that nut and you'll need a puller like a motorcycle 
mag puller to get the hub off.  Check the gap or specs for the clutch 
gap before dissasembly.  Some snug up with the nut, others you pull 
until the proper gap is achieved.
     Loren