[Vwdiesel] Funky Odo

[Roger Brown]

Libbybapa at wmconnect.com wrote:
> I've popped the needle off two other vw speedos in the past (vanagon) 
> and found it very difficult to get back on at the same location once the 
> spring pretention is released.  I imagine it is doable, but I've found 
> it difficult at best.

I find if you lift the needle over the stop post, as Loren mentioned, then note the position it points to, then reinstall it at 
that same position.  On mine, the shaft and needle are splined, so it was easy to get the same orientation when reassembling it.

-- 
    Roger