[Vwdiesel] Jet Hot coating

[LBaird119 at aol.com]

  If you want an excuse to buy an abrasive blast cabinet take a look here.
http://www.techlinecoatings.com/
  1200F is about as high as you would see if you turn fuel up and 
don't run an intercooler, maybe 1300F.  I'd seriously consider putting 
a 2 1/4 to 2 1/2 downpipe and exhaust on the car.  You may only be 
able to put 2 1/4 between the turbo outlet studs.  That factory downpipe 
is a real choker if you look through it.  Might be good to coat the outside 
of the ehaust part of the turbo.  Good hot spot there.  An intercooler would 
be a good add on project too.  More room for more fuel.  :-)  You drop 
EGTs when you drop intake temps too.
  Intake looks mighty purdy if you bead blast it and clear coat it too. :-)
    Loren