[Vwdiesel] Looking for a Turbo

[B & R Decker]

Hi Stephen;
	I'm not sure what you are saying you have to do the turbo conversion
or what application you have. The parts needed are somewhat different
depending on whether the engine is cross-ways or fore and aft. If crosswise
like in a Rabbit or Golf you should have a turbo specific exhaust manifold,
turbo with internal waste gate and a turbo intake manifold. You can use non
turbo injectors but you should have them rebuilt to turbo spec's. You can
also get away with a non turbo injection pump but it is better to have the
turbo injector pump with a boost controlled aneroid. I would also highly
recommend and oil cooler, Raceware or ARP head studs, boost gauge and of
ultimate importance if you expect the engine to live is a good pyrometer.
Brian Decker

-----Original Message-----
From: vwdiesel-bounces at vwfans.com [mailto:vwdiesel-bounces at vwfans.com] On
Behalf Of Stephen Kraus
Sent: Tuesday, December 19, 2006 2:27 PM
To: vwdiesel at vwfans.com
Subject: [Vwdiesel] Looking for a Turbo

So I have a turbo fuel injector but non-turbo air intake, so I'm on the hunt
to push some extra torque out of this beast.
Anybody have any good sources?

-- 
Stephen T. Kraus Jr.
Systems Administrator
Sofix Corporation
2800 Riverport Rd.
Chattanooga, TN 37406
Work: (423)624-3500 x111
Cell: (423) 227-6480
UB3RATL4Sf00 at gmail.com SKraus at sofix.net
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel