[Vwdiesel] Injector pump timing

[James Hansen]

Thoroughly clean the inside surface of the pump sprocket. (driver's side 
of the sprocket)
You'll find a small dot on the inside top of the pump sprocket inline 
with the pump halves when the pin is installed in the correct 
orientation.  If it's 180 degrees off, no dot.
You have to really clean it well.
-james

Tony and Lillie wrote:
> Does anyone know how to tell which is #1 TDC on an injector pump from a 1982 1.6L Diesel. I had a new motor mount pressed in, and can't put the locking pin in till I figure out which is which. 
> 
> I guess I'm assuming The pin will go in either of two positions on the pulley.
> 
> Tony Hoffman
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>