[Vwdiesel] Injector pump timing
Erik Lane
eriklane at gmail.com
Mon Apr 23 10:51:57 EDT 2007
A dot??? I've only ever seen a notch that was just a part of the casting of
the sprocket gear. On the backside of it right on the rim. Is there also a
dot that I've just never noticed?
Erik
On 4/23/07, James Hansen <jhsg at sasktel.net> wrote:
>
> Thoroughly clean the inside surface of the pump sprocket. (driver's side
> of the sprocket)
> You'll find a small dot on the inside top of the pump sprocket inline
> with the pump halves when the pin is installed in the correct
> orientation. If it's 180 degrees off, no dot.
> You have to really clean it well.
> -james
>
> Tony and Lillie wrote:
> > Does anyone know how to tell which is #1 TDC on an injector pump from a
> 1982 1.6L Diesel. I had a new motor mount pressed in, and can't put the
> locking pin in till I figure out which is which.
> >
> > I guess I'm assuming The pin will go in either of two positions on the
> pulley.
> >
> > Tony Hoffman
> > _______________________________________________
> > Vwdiesel mailing list
> > Vwdiesel at vwfans.com
> > http://www.audifans.com/mailman/listinfo/vwdiesel
> >
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>
More information about the Vwdiesel
mailing list