[Vwdiesel] Injector pump timing

[Rudy]

The notch is what you're looking for.

Rudy 

-----Original Message-----
From: vwdiesel-bounces at vwfans.com [mailto:vwdiesel-bounces at vwfans.com] On
Behalf Of Erik Lane
Sent: Monday, April 23, 2007 7:52 AM
To: James Hansen; vwdiesel at vwfans.com
Subject: Re: [Vwdiesel] Injector pump timing

A dot??? I've only ever seen a notch that was just a part of the casting of
the sprocket gear. On the backside of it right on the rim. Is there also a
dot that I've just never noticed?

Erik

On 4/23/07, James Hansen <jhsg at sasktel.net> wrote:
>
> Thoroughly clean the inside surface of the pump sprocket. (driver's 
> side of the sprocket) You'll find a small dot on the inside top of the 
> pump sprocket inline with the pump halves when the pin is installed in 
> the correct orientation.  If it's 180 degrees off, no dot.
> You have to really clean it well.
> -james
>
> Tony and Lillie wrote:
> > Does anyone know how to tell which is #1 TDC on an injector pump 
> > from a
> 1982 1.6L Diesel. I had a new motor mount pressed in, and can't put 
> the locking pin in till I figure out which is which.
> >
> > I guess I'm assuming The pin will go in either of two positions on 
> > the
> pulley.
> >
> > Tony Hoffman
> > _______________________________________________
> > Vwdiesel mailing list
> > Vwdiesel at vwfans.com
> > http://www.audifans.com/mailman/listinfo/vwdiesel
> >
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel