[Vwdiesel] Anyone know how to use the VW210 TB tension gauge?
LBaird119 at aol.com
LBaird119 at aol.com
Thu Aug 30 15:17:57 EDT 2007
In a message dated 8/30/2007 11:41:14 AM Pacific Daylight Time,
knealeski at sbcglobal.net writes:
> Anybody have step-by-step directions for using the diesel timing belt
> tension gauge VW210? You can see one at
> http://www.pbase.com/kneale_brownson/image/84722362
>
> I understand that the belt goes between the fingers on the base of the tool
> and the spring-loaded plunger that sticks out of the barrel with the numbers
> on it.
>
> The Bentley says I need a measurement of "12-13 index marks". How do I
> achieve that measurement? Where do I start? Are "index marks" the white numbers
> on the barrel or the black numbers on the handle?
>
As I recall you put the tool on the timing belt after
setting tension. Crank the knob to the desired setting
on the scale. Read where the sliding white-mark part is
pointing to. That's your tension. Adjust belt tension
and recheck if necessary.
Loren
**************************************
Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
More information about the Vwdiesel
mailing list