No subject
Mon Jul 2 17:29:25 EDT 2007
correctly set before doing the injection timing. I did my timing,
only to discover a few months later that my valve timing was off. So
when I adjusted my valve timing, I then had to do the injection
timing a second time.
-Bryan
On Tue, Jul 17, 2007 at 12:47:49PM -0500, Doug Presny wrote:
> I am installing a purchased remanufactured injection pump on a 1982
> diesel rabbit car. With previous help from the group, I have experience
> and am comfortable with timing. The "new" one looks like the old one
> and bolts in place. Is there anything special to adjust other than the
> timing? If I prime by vacuum to the return line and then crank engine
> to bleed air out of injection lines prior to connecting to injectors
> will that minimize priming problems? Other tips appreciated.
>
>
>
> Thanks - Doug
>
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>
More information about the Vwdiesel
mailing list