[Vwdiesel] Waterpump pulley diameter is wrong.

[Bryan Belman]

Diesel Waterpumps are different diameter for that pulley, yes.
You most likely have a gas motor waterpump so would need a gas 1.8 pulley to fit that waterpump?
I do not know what size belt you would need to get once this is changed?

Good luck.

Bryan Belman, Pt Pleasant, NJ
04 Jetta Wagon TDI PD, 100hp, 5sp   -- running :)
82 Diesel Westy 1.9NA               -- running :)
92 Jetta 1.6 Eco-Turbo Diesel       -- running :)
70 Type 1 stock Beetle              -- Not running :(


--- On Thu, 8/7/08, William Longyard <longyard at ix.netcom.com> wrote:

> From: William Longyard <longyard at ix.netcom.com>
> Subject: [Vwdiesel] Waterpump pulley diameter is wrong.
> To: vwdiesel at vwfans.com
> Date: Thursday, August 7, 2008, 1:26 PM
> I just replaced my waterpump and attached it to the 1.6 NA
> diesel truck, 
> reinstalled the a/c compressor, and now I go to put on the
> pulley and find 
> that it doesn't fit the waterpump I was sold.  The hub
> diameter is too small 
> and the mounting flange holes are also in a smaller
> circumference than my 
> original pulley.
> 
> What's up?  What kind of waterpump do I have?  I would
> rather not remove the 
> a/c, and the new waterpump.  Can I just find a different
> pulley that would 
> work?  What do I need?
> 
> HELP!! Please.
> 
> Bill Longyard
> 
> 
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel