[Vwdiesel] Cold Start Lever?

[Erik Lane]

That lever should be at rest when it is towrads the front of the pump.
Only when the knob on the dash is pulled out should the cam be pushing
in on the bar under there. The pushing on that bar is what advances
the timing for cold start.

Erik

On Thu, Aug 7, 2008 at 2:57 PM, William  Longyard
<longyard at ix.netcom.com> wrote:
> I'm putting some new seals in my IP, and after I took off the cold start
> lever, I couldn't figure out whether or not the cam device should be pushing
> down on the spring with the lever pulled to the left (dash knob out), or
> whether it should be in the "relaxed" condition when the lever is pulled to
> the left (dash knob out).
>
> Anyone know?
>
> Thanks,
> Bill Longyard
>
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>