[Vwdiesel] 1.9 diesel pump difference from 1.6

[James Hansen]

Have a close look at the sprockets guys.  The sprockets are not 
interchangeable... they FIT yes, same taper, length of thread and shaft 
etc, but the hub on the 1.9 pump has a different offset to accomodate 
the longer snout of the 1.9 pump... of it should anyway.   I had two 
different sprockets in my hand today in fact.
-james

Bryan Belman wrote:
> More expensive option is to find the front mounting
> plate and base mounting bracket for a 1.9AAZ block.
> They must be available.  Canadian junk yards should
> have them.  Anything 93 to 98 should be OK.
> 
> Thanks, Bryan
> 
> --- LBaird119 at aol.com wrote:
> 
>> In a message dated 3/18/2008 8:36:26 PM Pacific
>> Daylight Time, 
>> dieselwesty at yahoo.com writes:
>>
>>> Here is what alarmed me.  The 1.9 has a good 1/2
>> to
>>> 3/4" distance that it is going to put the pump
>>> sproket, out away from the pump.
>>   Spacer/s if necessary.  :-)  A little time, some
>> stock aluminum 
>> and a pattern and thickness measurement and I could
>> crank one 
>> out on the mill if necessary.  Otherwise three
>> spacers and 
>> reworking the rear bolt mount would do it.
>>     Loren
>>
>>
>> **************
>> Create a Home Theater Like the Pros. Watch the video
>>
>> on AOL Home.
>>       
>>
> (http://home.aol.com/diy/home-improvement-eric-stromer?video=15?ncid=aolhom00030000000001)
>> _______________________________________________
>> Vwdiesel mailing list
>> Vwdiesel at vwfans.com
>> http://www.audifans.com/mailman/listinfo/vwdiesel
>>
> 
> 
> Bryan Belman, Pt Pleasant, NJ
> 04 Jetta Wagon TDI PD, 100hp, 5sp   -- running :)
> 82 Diesel Westy 1.9NA               -- running :)
> 92 Jetta 1.6 Eco-Turbo Diesel       -- running :)
> 90 Audi 200, 2.2L Turbo FWD         -- stripping for parts now :(
> 70 Type 1 stock Beetle              -- Not running well :(
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
> 
>