[Vwdiesel] stuck ip sprocket 81 pickup

[Bryan Belman]

Will, I am not sure how close you are to Kingston, AR.
Derrick, the owner of Way Out Salvage, a place 20
minutes up in the mts. from Kingston, he will have a
puller that he may let you barrow or put a deposit on
it.  He is a very ingenuous guy and may know a few
tricks.
# 479-665-4126
or
salvage1 at madisoncounty.net
but the phone works better I have found
Tell him Bryan from NJ sent you.

--- Will Taygan <william at taygan.com> wrote:

> aarrgh.  I pulled the parts truck ip off to install
> on the 81, since
> that one developed a high-pressure stream coming
> from the bottom of the
> ip where the high pressure and low pressure(?) side
> of the pump connect.
> 
> Popped the cam sprocket off, popped the ip sprocket
> on the parts ip off,
> but d@#$%mned if I can get the sprocket of the 81. 
> I used a little 3"
> or so 2-arm puller and bent the puller a little. 
> Went to the parts
> rental place and paid $15 for a day's worth of a
> small but good 3-arm
> puller, it slips off under pressure.
> 
> normal technique is to put pressure on with the
> little puller and then
> smack the sprocket with a rubber mallet.
> 
> I'm about to spend $90 to priority mail the right
> tool from Pelican
> Parts (a little cheaper than zdmak, looks the the
> standard aftermarket
> puller):
> 
>
(http://www.pelicanparts.com/cgi-bin/ksearch/PEL_search.cgi?command=show_part_page&please_wait=N&make=POR&model=TOOL&section=VWAUDI&page=10&bookmark=20&part_number=TOL-VA6005)
> 
> I need this moved in 2 days, but the puller wouldn't
> be here for 5.  Any
> ideas?
> 
> Will
> Chugiak, AK
> 
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>