[Vwdiesel] special socket for 1.9 TD injectors?

[LBaird119 at aol.com]

In a message dated 11/2/2009 6:22:00 PM Pacific Standard Time, 
Mfgavia at aol.com writes:

> However, if too many $$ are involved, cutting an $8.99  socket in half 
> and 
> extending it or grinding some metal out  of the inside top with a really 
> hard drill bit may be the best option.  I  hope my welding skills are up 
> to the 
> torque requirements!
> 

  Good way to ruin a drill bit.  You need to chuck it in a lathe or 
at least a mill to clean out the socket farther.  You could drill, 
with a large enough drill, to the smaller diameter and that would 
probably clear.  Try Baum tools, schley tools or Hazet.  Not cheap 
but probably only 2x to 3x a regular deep socket and no mods needed.
    Loren