[Vwdiesel] special socket for 1.9 TD injectors?

[brian gochnauer]

Maybe a 3/4" drive (bigger hole) socket and grind a hex into the socket
(drive end) may work

On 11/3/09, travis gottschalk <tgott at hotmail.com> wrote:
>
>
> Would it help if you put the socket over the injector and then put the
> ratched in the socket. You won't have it fully in the square drive but I
> think the square hole is big enough to get the top of the injector (the
> threaded part) through some with enough there for the ratchet to still use.
> I used the same socket for my 1.6 as for the 1.9 aaz but being 1.5 years ago
> I think this is how I did it. Anything other then a lathe won't work on the
> socket very well as it is hardened and you will have a heck of a time
> drilling or cutting.
> Travis G.
>
> P.S. Let me know if that does work for you as I swear it works unless you
> have a little different socket. I bought mine from parts place in 2007.
>
> _________________________________________________________________
> Windows 7: Unclutter your desktop.
>
> http://go.microsoft.com/?linkid=9690331&ocid=PID24727::T:WLMTAGL:ON:WL:en-US:WWL_WIN_evergreen:112009
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>