[Vwdiesel] Is a 1.5 diesel head interchangeable with the 1.6 diesel head?

LBaird119 at aol.com LBaird119 at aol.com
Sun Feb 14 17:31:44 PST 2010


In a message dated 2/14/2010 10:41:14 AM Pacific Standard Time, 
tonyandlillie1 at earthlink.net writes:

> Hmm, I'll have to look at mine. But, I didn't use any adapter and don't 
> leak any oil at all. The head cam off a stock 1.5 from a 79 rabbit, and went 
> onto my 1.6 82 Jetta. I did have to drill out the holes, but other than 
> that, nothing else to bolt it on. I'll look at it and take some pics as far 
> as the oil holes lining up. I know the hydraulic heads are incompatible with 
> the early ones, but I was under the impression that the rest of them were 
> the same.
> 
> Tony
> 

  IT might be that if you put a 1.5 head on a 1.6 block that the drain 
will fall inline well enough so as not to leak. I was thinking that it 
left a small opening where dirt could get in though.  Whereas if you 
put a 1.6 head on a 1.5 block it seemed like you could see daylight or 
a water hole or something.  Been a LONG time since I tried it but 
that's how I remember it being.  Hyd on a mech block was just loony 
for lining up.
    Loren


More information about the Vwdiesel mailing list