[Vwdiesel] Removing injectors
mark shepherd
mark at shepher.fsnet.co.uk
Sat Feb 20 14:13:00 PST 2010
If the pump is in the way, wont it just swing [retard] enough for any socket
to fit? [measeure timing first]...
On the Quantum TD I find the spaceship can get in the way, so I can fit a
smaller box spanner inside the injector one, and this clears. Alternatively
set pump more upright, when timing, by jumping one tooth on the timing belt.
Mark
----- Original Message -----
From: "Stephen Kraus" <ub3ratl4sf00 at gmail.com>
To: "Craig Osborn" <cosborn at epix.net>; "vw fans" <vwdiesel at vwfans.com>
Sent: Saturday, February 20, 2010 9:35 PM
Subject: Re: [Vwdiesel] Removing injectors
>
> I just used a deep welled socket with a breaker bar to get them out.
>
> Sadly I don't know of a way to do it without removing the IP for the front
> two injectors
>
> On Sat, Feb 20, 2010 at 1:33 PM, Craig Osborn <cosborn at epix.net> wrote:
>
>> Is there a special socket for removing the fuel injectors from my 81 1.6D
>> pickup?
>> There does not appear to be enough room to maneuver a spanner without
>> removing the fuel pump.
>>
>> Craig
>>
>> _______________________________________________
>> Vwdiesel mailing list
>> Vwdiesel at vwfans.com
>> http://www.audifans.com/mailman/listinfo/vwdiesel
>>
>
>
>
> --
> ______________________________
> Stephen Kraus
> UB3RATL4Sf00 at gmail.com;
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>
More information about the Vwdiesel
mailing list