[Vwdiesel] More Quantum Questions?

[brian hoeft]

first a disclaimer; these values are from my notes pertaining to my '86 TD
Jetta taken from the Bentley manual. dont think i have a quantum book..

70Nm/51ft.lbs. are the torque values for the upper to lower body of the
injectors AS WELL as injector to cyl. head.

BTW, i dont know what your using to remove/install them, but i chose to take
a ?27mm deepwell i got from a local truck shop and carefully dremel pockets
out of the inside of the socket so no damage to the return line nipples
would occur.

-brian


On Wed, Jan 27, 2010 at 5:28 AM, William J Toensing
<toensing at wildblue.net>wrote:

> I think I have the Quantum timed OK this time. However, I have a question.
> What should I torque the injectors to?  While I had the injectors out, I
> decided to run a compression check so here are the readings from the cheap
> diesel compression tester I bought on eBay. #1, 380; #2, 300, #3, 360, #4,
> 320. The Bentley said the maximum variance from high to low is 79 psi so I
> guess I am on the borderline.
> Bill Toensing, Nevada City, CA
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>



-- 
http://208.53.138.125:8068/
[blinders off&earplugs out]