[Vwdiesel] Plastic line from vane vacuum pump to brake booster
Bryan Belman
dieselwesty at yahoo.com
Mon Sep 12 08:28:49 PDT 2011
Oh, I was not reading that properly. I am not sure if they have it in that diameter, but I bet they do.
Would a spare I have from a Vanagon work, do you have a picture of it you could send?
Bryan Belman, Pt. Pleasant, NJ
04 Jetta Wagon TDI PD, 100hp, 5sp -- running :<)
92 Jetta 1.6 Eco-Turbo Diesel, 5sp -- running :<)
82 Diesel Westy 1.9NA -- running :<)
70 Type 1 stock Elm Green Beetle -- Under Restoration :-)
From: ken1 <ktzkarz at embarqmail.com>
To: Bryan Belman <dieselwesty at yahoo.com>
Sent: Monday, September 12, 2011 11:25 AM
Subject: Re: [Vwdiesel] Plastic line from vane vacuum pump to brake booster
Thanks, Bryan. Will check it out. ken
----- Original Message -----
From: Bryan Belman <dieselwesty at yahoo.com>
To: ken1 <ktzkarz at embarqmail.com>, vwdiesels <vwdiesel at vwfans.com>
Sent: Mon, 12 Sep 2011 11:22:20 -0400 (EDT)
Subject: Re: [Vwdiesel] Plastic line from vane vacuum pump to brake booster
Ken, you could also go to Lowes and get the polyetholine (sp) line for $1.22 a foot and use this. the inside diameter is perfect, 3/8" ID works fine. I took the barb with me from a spare banjo connection and it works great.
If you want to heat this and bend it to the same shape you sure could.
Bryan Belman, Pt. Pleasant, NJ
04 Jetta Wagon TDI PD, 100hp, 5sp -- running :<)
92 Jetta 1.6 Eco-Turbo Diesel, 5sp -- running :<)
82 Diesel Westy 1.9NA -- running :<)
70 Type 1 stock Elm Green Beetle -- Under Restoration :-)
From: ken1 <ktzkarz at embarqmail.com>
To: Tony and Lillie <tonyandlillie1 at earthlink.net>
Cc: dlist <vwdiesel at vwfans.com>
Sent: Monday, September 12, 2011 11:16 AM
Subject: Re: [Vwdiesel] Plastic line from vane vacuum pump to brake booster
Well, I was able to "patch" mine. Plugged broken nipples with small screw and silicone sealer. Will try to get proper check valve
and grommet soon. My plastic line is 9mm I.D. and 12mm-13mm O.D. I will cotinue to seek my heat gun and experiment. ken
----- Original Message -----
From: Tony and Lillie <tonyandlillie1 at earthlink.net>
To: ken1 <ktzkarz at embarqmail.com>, dlist <vwdiesel at vwfans.com>
Sent: Sun, 11 Sep 2011 21:32:29 -0400 (EDT)
Subject: Re: [Vwdiesel] Plastic line from vane vacuum pump to brake booster
It can simply be replaced with the standard Vw vent line in that size. I
don't recall exactly what size, but 7mm seems to come to mind.
The hose splits all the time on late model VAG's, and we just replace it
with the older flexible stuff. Never have any issues after
replacement.
Tony
----- Original Message -----
Subject: [Vwdiesel] Plastic line from vane vacuum pump to brake booster
> Have old pre-shaped plastic line. Can it be re-heated and re-shaped? My
> jury rigged setup had the same type valve that is on the vac pump (had two
> nipples) and then had a hose connecting the two nipples. I reached to
> tighten the big hose connection and yes, it happened; one of the nipples
> snapped off. I will try to seal with super glue until I determine that the
> plastic pipe can be re-shaped AND I find my heat gun. lol TIA
> --
> 1982 caddy 1.6L NA running
> 1967 convertible bug running
> 1980 caddy project
--
1982 caddy 1.6L NA running
1967 convertible bug running
1980 caddy project
_______________________________________________
Vwdiesel mailing list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel
--
1982 caddy 1.6L NA running
1967 convertible bug running
1980 caddy project
More information about the Vwdiesel
mailing list