[Vwdiesel] PS belt

[brian hoeft]

I think the catalogs show it being 10x850 but from what you posted it
sounds like you did the hard part and have the answer already.

I've been known to remove the pulley since many times the adjuster would
turn to powder if used, and personally would rather see the adjustment
towards the "in" as you describe. Your 614 may just do the trick. I do like
continental as well so while you're at it might as well custom tailor it to
your liking.

>From experience, with time lapse, and variations in replacement parts, I
don't think we can go on by the book correct lengths necessarily.





On Tue, Feb 21, 2012 at 7:03 PM, Pam & Doug Boes <db53248 at windstream.net>wrote:

> What is the correct circumference (length) of the belt that drives the
> power
> steering pump on an 81' rabbit diesel pickup? I have a Gates belt on it now
> that is
>
> 10 mm X 624 mm and the adjustment is out all the way. I tried a Gates that
> is 10 mm X 614 mm and could not get it on with the adjustment all the way
> in. I want to switch to a Continental belt. Is 617 mm the correct length?
>
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>



-- 
*       -Brian*
      [blinders off&ear <http://208.53.138.125:8068/>plugs out]