[Vwdiesel] Oil pump pick up tube

[ralph meyermann]

I've been shopping for a 1.6td Vanagon oil pump, I'm finding oil pumps but
they are not specifying that its for 1.6 td. Part # is 068115105BP, did
they drop the small pump in favor for the large pump? My local VW dealer
couldn't specify either?? Any help would be appreciated, thanks!!

Velma 82 na diesel westy
On Jul 6, 2013 5:06 PM, "Andrew .Libby" <libbybapa at gmail.com> wrote:

> The 1.6 non/-turbo vanagon oil pump has 30mm gears and the pickup tube has
> an integral pressure control valve.  That valve is sized to the 30mm pump.
>  The AAZ has a 36mm pump and so the pressure control valve of the stock
> non-turbo vanagon oil pump is not sized appropriately.  Best is to purchase
> a 1.6TD vanagon oil pump, all of which are now 36mm and appropriately sized
> for the AAZ engine.
>
> IMO, the windage tray is most helpful in the vanagon install.  It reduces
> the amount of oil sloshing up on extended right-hand turns.  If you have
> one already I would definitely use it.
>
>
> On Sat, Jul 6, 2013 at 1:21 PM, ralph meyermann <ralphmeyermann at gmail.com>wrote:
>
>> Yes it's me again bending your ears with more questions,thank you for your
>> patience!! The old pick up tube on my 1.6 is actually part of the oil pump
>> flange that will unbolt from the main body of the pump. My question is can
>> I swap that to the new engine's pump?? I figure they are both machined
>> flat
>> surfaces and should interchange? Another question is should I put in a new
>> windage tray or just a gasket due to the approximately 45 degree engine
>> angle?? I fear the windage tray may not drain properly! I'm not a
>> mechanical dummy I just dont have much experience with VW's mostly
>> domestic
>> engines and vehicles. Thanks again!!
>> Velma 82 na diesel westy
>> _______________________________________________
>> Vwdiesel mailing list
>> Vwdiesel at vwfans.com
>> http://www.audifans.com/mailman/listinfo/vwdiesel
>>
>
>