[Vwdiesel] Jett's control arm bushings

lbaird119 at aol.com lbaird119 at aol.com
Wed May 1 07:34:48 PDT 2013


  If you ever have to buy brushes, they come with a nice, plactic installation tool.  Put it in, on the bench, (comes installed on new brushes) and just slide them on.  Decided that was a good thing to keep!
    Loren



-----Original Message-----
From: Travis . <tgott at hotmail.com>
To: vwdiesel <vwdiesel at vwfans.com>
Sent: Wed, May 1, 2013 6:56 am
Subject: Re: [Vwdiesel] Jett's control arm bushings


 
 also greased my starter. I took it apart based on the DYI things on the 
nternet. In the winter my starter sticks engaged for a second and makes a 
rinding noise. Has done it since I bought in 08. I took thing apart. Cleaned 
ith contact cleaner/rag and put some synthetic grase on the gears/bearings. 
on't know if it will help but the old grease was hard and gray with metal. A 
ittle tip-don't pull the brushes off the motor as they stink putting back on. I 
reased that bushing on the motor and moved the brushes off to far on the end 
hen all 4 poped off. Had to have my wife hold two while I held one to get on 
nd then put the 4th one on after that. 




More information about the Vwdiesel mailing list