[Vwdiesel] pump id
Andrew .Libby
libbybapa at gmail.com
Tue Apr 28 10:28:15 PDT 2015
>From the information given, I do not see how one can determine whether or
not the pump is a 'turbo pump'. The aneroid assembly was fitted to turbo
pumps and to late 1.6 non-turbo engines with 'altitude compensation'. On
the altitude compensation pumps, the aneroid assembly was basically
operated in revers in order to reduce max fuel at higher altitude where
ambient pressure is reduced. While the two pumps look remarkably similar
on the exterior they are not the same. The 'boost pin' is much milder in
profile on the altitude compensation pumps and the spring is much weaker.
On Tue, Apr 28, 2015 at 9:55 AM, Gunny <mi6customfab at gmail.com> wrote:
> It's a turbo pump
>
> On Tuesday, April 28, 2015, raymond <rgreeley2 at hotmail.com> wrote:
>
> > hi all, while reviewing an engine i had picked up though never
> > investigated. it occurred to me that i am not sure of the ip that i am
> > looking at. while it is a 1.6 na engine, it has a pump with a rectangular
> > (space ship) diaphragm thing on top. the type that i have seen used on
> > turbo engines. is there a site i can reference the model number. also, i
> > would like to id the engine type. like i said it is a 1.6 though a
> > perspective buyer was curious at to whether it was a hydraulic head. the
> > number on the block is cr833966. wiki says it is an early 80's engine
> which
> > came out of a caddy though this was a world wide use and listed years not
> > present for the us market.
> > fyi i am looking to buy a k14 turbo for my back up engine. wiki also
> > suggested this motor used a garret turbo though did not list a part
> number.
> > so i am wondering if the list finds one of these turbos to perform better
> > on the 1.6. i do have yet a second td motor with a slightly bigger turbo.
> > while this motor may be a good back up, it has not run in several years
> it
> > will start though runs at high rpm and so i shut it down quickly. i am
> > running a cleansing mix of fuel in hopes that it willcure this condition.
> > just sorting out some parts and cleaning the shop a bit. i am in chicago
> > if anyone might be interested in a running na motor.
> > ray
> > _______________________________________________
> > Vwdiesel mailing list
> > Vwdiesel at vwfans.com <javascript:;>
> > http://www.audifans.com/mailman/listinfo/vwdiesel
> >
>
>
> --
> MI 6 custom fabrication
> innovation in 3 wheel car design
> _______________________________________________
> Vwdiesel mailing list
> Vwdiesel at vwfans.com
> http://www.audifans.com/mailman/listinfo/vwdiesel
>
More information about the Vwdiesel
mailing list