[Vwdiesel] pump id

[lbaird119 at aol.com]

What's the number on the pump?  If it's an atmospheric compensator then the breather 
will be on the top/lid.  If it's a boos compensator then a banjo/barbed hose fitting will be 
on the lid and the breather will be below the lower part of the "dome".
     Loren



-----Original Message-----
From: raymond <rgreeley2 at hotmail.com>
To: Vwdiesel at vwfans.com <vwdiesel at vwfans.com>
Sent: Mon, Apr 27, 2015 9:08 pm
Subject: [Vwdiesel] pump id


hi all, while reviewing an engine i had picked up though never investigated. it
occurred to me that i am not sure of the ip that i am looking at. while it is a
1.6 na engine, it has a pump with a rectangular (space ship) diaphragm thing on
top. the type that i have seen used on turbo engines. is there a site i can
reference the model number. also, i would like to id the engine type. like i
said it is a 1.6 though a perspective buyer was curious at to whether it was a
hydraulic head. the number on the block is cr833966. wiki says it is an early
80's engine which came out of a caddy though this was a world wide use and
listed years not present for the us market. 
fyi i am looking to buy a k14 turbo
for my back up engine. wiki also suggested this motor used a garret turbo though
did not list a part number. so i am wondering if the list finds one of these
turbos to perform better on the 1.6. i do have yet a second td motor with a
slightly bigger turbo. while this motor may be a good back up, it has not run in
several years it will start though runs at high rpm and so i shut it down
quickly. i am running a cleansing mix of fuel in hopes that it willcure this
condition. 
just sorting out some parts and cleaning the shop a bit. i am in
chicago if anyone might be interested in a running na motor. 
ray 		 	   		 

_______________________________________________
Vwdiesel mailing
list
Vwdiesel at vwfans.com
http://www.audifans.com/mailman/listinfo/vwdiesel