Valve noise

[Ramiro Reinoso <ramiro@ctt.bellcore.com>]

My 1987 4000CSQ also rattle its valves when cold.  I never paid much
attention to this because the noise went away after it warmed up.  Now
I'm curious to find out what causes that noise.

----------------------------------------------------------------------
   Date: Wed, 11 Nov 92 17:33:46 -0500
   From: jrd@po.cwru.edu (John R. Daker)
   Reply-To: jrd@po.cwru.edu (John R. Daker)
   Content-Length: 703

   I have an 86 4000CSQ.  When started, it makes a bunch of noise.  SOunds
   like valve clatter.  Problem:  They're hydrauli and non-adjustable.
   So, the problem must lie elsewhere.  It does quit after the engine
   has run for a while.  Any of you geniuses know what this is?  WHat
   should be done?

   Yes, I have come to the realization that I need the Bentley book,
   but can't afford the admission price yet.  Besides, what could a
   book tell me that you guys (and gals) couldn't?


   --
   ------------------------------------------------------------>DarkMan-------->
   Case Western Reserve University, Cleveland, Ohio DoD #650 Anyone
   know where a BSME can get a job?  Available 1/93.  This is for
   real!


Ramiro Reinoso, 444 Hoes Lane, Office RRC-1E-226. Piscataway, NJ 08854
(PHONE) (908) 699-5021 (INTERNET) ramiro@ctt.bellcore.com (UUCP)
...!bellcore!ctt!ramiro