Re: Extrude Honing & Turbo ma...

[PDQSHIP@aol.com]

Re:  Extrude Hone...  The polish from the EH process is so mirror like, it's
unbelievable, even on aluminum!!  The difference in et can be argued because
of the non turbulence flow of air with a fuel injected car, gives more volume
of air the smoother the route (vs swirl port or wave port processes common to
carbuerated moters)  to the pistons.  EH does nothing more than eliminate the
sharp transitions within or between molds, which is why for the best EH
results the intake head and exhaust are put in the machine as an assembled
unit.  EH will also increase torque on most applications as well.  Definitely
a speed  enhancing device on any fuel injected car.


PDQSHIP@aol.com