Re: Climate Control Diags <==CORRECTION!

[steveb@newkla.kla.com (Steven Buchholz)]

Lance Ware discovered an error in my previous instructions regarding access-
ing the fault channels in the Climate Control.  The system is activated by 
holding down the "OUTSIDE TEMP" button and then depressing the "OFF" button.  
My apologies!

Do as I do, not as I say!
Steve Buchholz
s_buchho@kla.com

CORRECTED TEXT ...
> The fault system can be activated when the ignition switch is in the ON 
> position, the engine need not be running.  The fault system is activated 
* by pressing the "ON" button while holding down the "OUTSIDE TEMP" 
                  ^^^^
> button.  After activating the fault system the "OUTSIDE TEMP" button can 
> be released.  When initially activated the numeric LED displays will in-
> dicate a code of `01.  This value indicates the "channel" that is select-
> ed for monitoring.  Notice that the Climate Control system will continue 
> to operate in the mode it was in before the fault system was activated, 
> and it is possible to terminate the fault system display by pressing any 
> button on the head other than the "WARMER" and "COOLER" buttons.