[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Re: Special bit for inner CV joint ..

To: r3rfp@dax.cc.uakron.edu (Robert Phillips)
Subject: Re: Special bit for inner CV joint ..
From: Alan Cordeiro <cordeiro@avlna.com>
Date: Fri, 17 Mar 95 13:42:49 EST
Cc: quattro@coimbra.ans.net
In-Reply-To: <Pine.ULT.3.91.950317005718.20100G-100000@dax.cc.uakron.edu>; from "Robert Phillips" at Mar 17, 95 12:58 (midnight)
Mailer: Elm [revision: 70.85]
Sender: quattro-owner@coimbra.ans.net

> 
> On Thu, 16 Mar 1995, Arun Rao wrote:
> 
Stuff deleted
> 
> That would be the infamous "triple-square" bit.  It is also sometimes 
> just called a "12 point" bit.  They are metric, and I think that they 
> were an 8mm on my 4000S non-q.
> 			----Bob

The 5kTs % Qs use a 10 mm triple square. NAPA has it for $8.00 or so
but you need a knowledgeable sales person. I was told they did'nt have it
and went to my local freign parts place for it. Later I spotted it
another day on one of the "emergency aprts swivel display racks.

Alan Cordeiro
'865kQ
>

References:
- Re: Special bit for inner CV joint ..
  - From: Robert Phillips <r3rfp@dax.cc.uakron.edu>

Prev by Author: Re: Need 5K Turbo Head-light/switch
Next by Author: Article on the 20 valve engine.
Prev by thread: Re: Special bit for inner CV joint ..
Next by thread: Special bit for inner CV joint ..
Index(es):
- Author
- Thread