Re: RPM Limiter

[bbell@csn.net (Bruce Bell)]

>  When I hit the rev limiter in the '84 4000Q the engine cuts-out totally,
>  like you switched off the ignition, then comes back on when the revs drop
>  a bit. This is terrible in auto-x, you have to be very careful to hold
>  the RPM just below the cut-out point or upshift.   :(
>
>  -glen

Exactly! I want something around 7000 rpm. The hyd lifters are probably
suspect much over 7000 anyway. I don't need 7000 rpm, even with the Schrick,
but I want 6500 + without worry of cutting out - especially in first or
second gear.

Bruce

bbell@csn.net (Bruce Bell)