Re: Cam advancing - Turbo Updates

[PDQSHIP@aol.com]

In a message dated 95-09-21 14:17:35 EDT, you write:

>
>I think I understand the cam bumping trick pretty well, thanks.
>Is there any deliterious effect on the valves over time?
>
>The turbos I a still a little confused about. All this talk of
>cores versus new RS2's is whats got me goin. Here's my q?'s:
>
>	1. Are you doing mods to existing air cooled units? 
Not sure what this means, but I can tell you that I will need your core, and
the bearing housing is used from your turbo, but the hot/cold sides will be
different
>
>	2. Are you planning to sell modified water cooled units?
Yes, in fact, at this point, I'm very wary of selling hi-performance turbos
without the water cooled housing upgrade (pre 86)....   And to start  me
thinks the answer is no.....  Tho consideration would be made to afteroilers
or sump arrangements......  Remember, the modified turbos will be spinning
faster than stock.........
>
>	3. What do stage 3,5,8 represent?
Changes in pieces parts....  There are basically 4 variables:  hot side
housing, hot side turbine, cold side housing and cold side compressor
wheel......  The stages will be combinations of these variables
>
>	4. What is EH?
Extrude Hone Process......  It is silly putty with sand that is "extruded"
thru metal orifices or parts, and the effect is polishing to the utmost
degree, can do intakes, exhausts, turbos heads etc on cars and the gains in
HP and torque almost defy explanation.....
>
>
>I don't want to get into your proprietary info, but I do want to be 
>an informed consumer.  I have no problem with you "selling" over the 
>net.  I see you as offering a unique service, on which is information 
>intensive. And this forum provides a means for communicating the 
>information.  I can respect you may want to place limits, however. 
>I think if Ned was a lister we would be happy to have him discuss 
>the features of his ECU mod's in the same fashion. Sound fair?  
>(God, I hope this doesn't start a huge debate!)
>
Not one to be started, I am the first one that will agree to no "selling" on
the net (BTDT opinion on former posts) and will not offer any more specifics
than what you see here unless in private e-mail form......   If anyone else
want to be on my datalist, private mail me....

Scott