Re: Cam advancing - Turbo Updates

[LToy@aol.com]

>EH == Extrusion Honed, eh!  I heard that Ned was selling some
>extrusion honed exaust manifolds.

Last I heard, Ned's exhaust manifolds were specifically for the 20v motors.
 The stock manifold on these cars has a convoluted path for cylinders 1 & 5
and the wastegate location causes abrupt changes to flow (when it operates).
 Ned's manifold was a cast-iron piece with greatly smoothed out flow lines,
plus EH treatment.  Purpose was to get the heat out of the cylinder head
better, avoiding burnt valves on these two cylinders.  Don't know if he's
done something for the 10v.

--Linus
LToy@aol.com