Re: Repairing window switch LEDs/replacing console switch bulbs

[Michael Spiers <mikes@specnet.com>]

Peter, the bulbs in the window switches are pretty much Radio Shack T1 bulbs.
 T1 is the size, by the way.  As far as the other two bulbs, I'm not too sure
what they look like.  I'd bet they're also at Radio Shack though.  One of the
bulbs on the differential lock on my TQ burned out last year, and I replaced it
by taking the old bulb (actually, I took the whole stinkin' display) in to
Radio Shack and standing in front of the bulb section for a while matching
things up.  If you're good with a soldering iron (don't use a soldering gun,
you'll melt down the whole circuit board) you'll be all set.  Good luck!

-- 
-Mike
mikes@specnet.com
mks107@psuvm.psu.edu
87 5000CS TQ
84 5000S (2,000 miles away and a mile high)
90 80 (sibling's mode of transportation I get lynched into working on)