No Subject

[dupina@rosnet.strose.edu (Angela E. Dupin)]

DIY ALIGNMENT. TOE

USING A LENGTH OF MASON'S LINE (STRING)

Note: assumes same track on both axles; corrections must be made if it isn't
the case.

Stretch the line along the outside of the tires, midway up the tire, between 
both axles.  Hold line taught and bring it slowly toward the axle to be adjustedOn the opposite axle the line is held tight to the far side of the tire.
When doing a front axle you must either center the steering wheel or find the 
straight ahead position by trial and error itiration process.  The string will either contact the tire at the front or back depending on toe-in or out.  Make
corrections until the proper amount of toe is obtained.
NOTE: camber must be adjusted first.  always roll car back and forth and recheckin order to remove all preload or friction.

	all the best,

	Phil