Re: Oil Warning Light Com

[cebo@channel1.com (Cebo)]

 ScottB2460@aol.com writes:


 Sc> driveway.  It idles at 8000RPM and the oil pressure gauge shows a tad
                            ^^^^^^^
 Sc> over 2.0bar.  If I increase RPM's, the oil pressure gague top out at
 Sc> 5.0 at 32000RPM.  If I take my foot off the gas, RPM's go down to 8000
            ^^^^^^^^^

 
 Sc> and oil pressure goes back to 2.0/2.1bar. Any suggestions on what I
 Sc> should check, or should I  not worry about it until the warning light
 Sc> comes back. I appreciate any information.

    Yeah, at these RPM's I believe the oil doesn't have time
    to make it's way back to the oil pan.....

   I've had the oil level light go on at startup for the 
   last four or five years on my 5000s. I've always 
   considered it a bad switch or wire problem since 
   the oil pressure is always up to snuff.


   BCNU

... "Let's win this one and go home." - George A. Custer
___ Blue Wave/QWK v2.12