Re: Noisy Lifters

[STEADIRIC@aol.com]

>Pyroil Engine Flush is what I use.  Comes from Auto Zone.

You know to be perfectly honest I WOULD NOT use ANY of these snake oils.  
Here's what I suggest: Three Flush and Fills (With Filtert Changes) with 
a high quality High Detergent engine oil, Run the engine up to temp and 
then run it for 5 to 10 more mins. at various RPM's.  After you drain the 
third fill change the filter and fill the sump with Mobile 1 15w-50 
Synthetic oil.  That should quiet things down quite a bit.  Woked for me 
and PDQSHIP When he did a engine swap with a motor that had not turned 
over for 2 years.



Later!

Eric Fletcher
'87 5KCSTQIA2RSR2B

STEADI RIC@aol.com