Re: Coupe Brake Light

[Glen Powell/SMC <Glen.Powell@smc.com>]

FRANCE! Those crappy rear light assys for the Coupe's and ur-q are MADE IN 
FRANCE!

-bob


I'll vouch for Gene's solution stated below..  Had the same problem on both
sides on my 86 Coupe and fixed it the same way..  As a matter of fact had
the same problem on a tail light assembly on my now parted 84 VW Jetta. The
Germans have some good engineering in their cars, but the plastic tail light
assembly isn't included.

Norm in Ottawa Canada,  86 Coupe GT.. 


I had the same problem.  Check the plastic housing holding the light
>bulbs.  The metal circuitry is secured to the housing with plastic
>(melted) welds.  Look for broken welds or any location where the
>circuitry is not held tight against the housing.  If you find such
>spots, resecure with small self-tapping screw.  This did it for me.
>
>Gene  86 4000S
>Harrisburg.PA
>
>
 Norm Rashleigh        |  Internet   VE3LC@hydra.carleton.ca
 Ottawa, Ontario       |  Freenet    an131@freenet.carleton.ca
 CANADA                |  Amprnet    VE3LC@VE3LC.ampr.org 
                       |  Home Page  http://www.ncf.carleton.ca/~an131