Re: Seat Heater lights & Reset Switch

[charlie@elektro.cmhnet.org (Charlie Smith)]

Earlier, Joe Yakubik wrote:

> Originally intended for Soloman Ngan, but his address wouldn't accept it:
> On 30 Dec Soloman wrote "... the light of the switch doesn't work."
> 
> ... I've asked about similar replacements, but I can't find the wattage for
> the bulb, and I get looks like "So what, buy a new switch".  

> I tried to measure
> the resistance of the good bulb in my other switch, but it is so small as to
> measure zero on my multi-meter.  If you do find the correct bulb, on 
> your own or from someone else on the list, please let me know.
 
I've figured out what to use for bulbs - the rest of the instrument
lights have replaceable bulbs, and those bulbs are fastened into little
plastic holders that twist into the back of the instrument needing
the light.  The actual bulbs appear to be the same!   You can get some
extra plastic mounted bulbs and take them out of the plastic part!

All of the plastic mounted bulb holders are marked 12/1.2 on the bottom
except the one that illuminates the clock - and it's marked 12/2.0 -
and also will have a colored holder; I've seen both white and olive green
on this - the 1.2w lights have black holders.

Now, since that one's solved - has anyone figured out how to put 
my @&$%# computer/reset switch back together so it works?  After I 
perform the above discussed bulbadectomy, that is  :-)


    - Charlie



Charlie Smith   charlie@elektro.cmhnet.org  614-471-1418  
Columbus, Ohio USA


 4 wheeled fleet:			 2 wheeled fleet:
_________________________               _________________________
86 5kCSTQ      				92 Ducati 851SP     851cc
69 Porsche 911S   3,200cc		95 BMW R100-RT    1,000cc
81 VW Diesel Pickup  			62 BMW R27          250cc