Wheel corroded onto hubs

[bruce@pwi.com (Bruce Romero)]

Hello all, I have a question about removing the wheels on a 
100 S that is a recent acquisition. The wheels seem to be 
corroded onto the hubs. The car has 45k on it and did spend 
it's early life in Wisconsin and now is in Washington State.

I wanted to check the brake pads so I removed the lug bolts
but the wheel would not budge. The same thing happened to the 
V8 but to a much lesser extent. I yanked and pulled and tugged
on the wheel and got no movement at all. The wheels must
have been removed at some time in there life as the tires are 
newer than 45k.  

Is this common and does any body out there have a solution?

'90 V8
'92 100S (fwd)



Thanks, 

Bruce Romero                                   phone : (206) 828-4223 x110
Senior Sales Representative                    fax   : (206) 828-5895
Personal Workstations Inc.                     email : bruce@pwi.com
10632 NE 37th Circle                           www   : http://www.pwi.com
Kirkland, WA 98033