Charlies shim

[Neil Swanson <75377.3445@compuserve.com>]

No shim?

Me either.  I put in just the spring on my '885ktq.  Worked great. Got 1.6-7bar
   Needed more.  I got a big washer at the hardware store.  I think the ID was
1/2"?  Maybe 5/8.  About 140 thou. thick.  OD worked fine, fit in the housing.
Did the washer and got 1.7-8 bar.  Add another washer and get a good strong 1.8
bar.  No sign of ping etc.  I strapped the IC long before I did the spring.  I
know myself too well not to.

Total cost $.40 plus the $20 for the spring so $20.40.

Neil
CT