Ur-Q flywheel pins?

[Glen Powell <gpowell@acacianet.com>]

Ur-Q flywheels have 6 dowel pins:

One small diam pin on the engine side to trigger the crank position sensor for the nigition

Three large pins on the trans side to locate the pressure plate - and

Two small diam pins on the trans side close together and between two notches in the pressure plate that appear to do nothing A-tall. I think 4KQs have these two as well, but no crank-fired nigition......

Bently say all these pins must be installed or 'engine will not start' or somethin' similar. The Ur-Q RPM sensor reads the flywheel's starter teeth......

Anyone know what the heck these two small diam pins on the trans side are fer?

-glen