Re: Engine Hoisting - not

[NickBenz@aol.com]

In a message dated 96-05-01 19:19:06 EDT, you write:

>From:	PDQSHIP@aol.com
>Sender:	owner-quattro@coimbra.ans.net
>To:	cobram@channel1.com
>CC:	quattro@coimbra.ans.net
>
>In a message dated 96-05-01 17:06:33 EDT, you write:
>
>> schulz@tif623.ed.ray.com (Peter Schulz) asks:
>> PS> We are looking one that can be easily stored when not in use.
>> PS> Sam's carries an American-made 2 ton hoist for about $250.
>>
>> PS> Do any listers have any recommendations????
>>
>>     Just about any hoist will work fine.  If you want problem
>>     free hoisting you absolutly need an engine hoist positioner.
>>     I 
>
>If you have a q, and are taking it out from the top, don't do it, it takes 3
>times the time....  DROP it down, that's THE way.....  And no engine
>postitioner is necessary....  Take the subframe off, and drop it down it's
>quick and dirty....
>
>Scott
>
If you go back and read the original post, he was looking for a lift for 
a Non-Audi vehicle.  I would agree though, it's alot easier..if the
subframe bolts come out....