Re: Valve timing

[PDQSHIP@aol.com]

In a message dated 96-05-04 17:20:52 EDT, you write:

>a) Dot on cam sprocket lined up with cam cover and flywheel '0'
>or
>b) Dot on cam sprocket lined up with cam cover and mark on crankshaft pulley
>   lined up with pointer on block
>
>

YES.....   Specifically, the mark on the crank pulley is used at the factory,
so as to not let the morons get 180 out of whack on the timing....  But as
the car gets used that crank line is less than accurate, cuz it sits in
rubber......  Cam dot at cam cover, flywheel at 0, dist points to tdc....
 That is THE way....

Scott