[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: 200q heated seats
At 02:28 PM 5/21/96 -0500, you wrote:
>
>My drivers heated seat is inoperational (bottom and back) and the shop
>is going to take the seat apart on Thursday. I am thinking that it is
>probably NOT the heating element since both the bottom and back are not
>working. On a previous visit to the shop, they checked the switch,
>visable wires underneath the seat, the relay makes its clicking sound.
>Nothing out of the ordinary there, and they felt they needed to go into
>the seat.
>
>Appreciate anybody with previous heated seat problems on 200's share
>their experience on what was wrong with me. Linda@Carlson can sell me
>an element and I can return it if its not the element. Think I should
>buy one for the bum and back, take it to the shop, and see what they
>find out?
>
>Scott
>89 200tqw
>
Scott,
Open bottom heater element. Bottom and back elements are connected in
series. Open typically occurs at the left bolster on the bottom. There is a
pretty good repair procedure in the archives for this.
*******************************************************************
Michael Loeks
'86 5kcstq - Red w/ Fuchs/D60A2 wheels 1.8 bar boost
'86 5kcstq - Grey w/ stock wheels/Comp T/A HR4 1.8 bar boost
'84 Ford F350 dually flatbed(NOW we're talking utility)
Warren, Oregon
*******************************************************************