4KCSQ Right Rear end SAG!!

[Nicholas Menaker <72074.2716@CompuServe.COM>]

I too have the right rear end sage on my '86 4KCSQ.  I just replaced the
shocks with Boge Turbo Gas and the springs with the Eibach Pro-kit.  They
lowered the car about 1" up front, and 3/4" in the rear, but the RR is
STILL lower than the other LR by about 1/2"  What is up with this.  I have
seen it on other 4KCSQ, but thought that it was due to shock strut or
spring wear.  This should have dissappeard?  Any tips would be appreciated,
I hate it.

Incidentally, for those of you asking recently.  I have 205/55/15 Dunlop
D40M2 on the car and had a bit of rubbing as well.  This has vanished
except for the very hard left turn in a bump corner, and then the rub is
only at the back right trailing edge.  Definitly change the shocks and
springs to help correct, and then maybe do a little cutting of the traling
edge of the rear fender.

Nick out