[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Quick Question for the A/C Meister...
At 07:48 PM 6/1/96 -0400, you wrote:
>>This is probly detailed on page 87.155 of the Bentley, but:
>
>Weeeellllllll that's the prollum I can't find my bBently Electrical
>book......
Not to totally amaze you, but section 87 is in the Mechanical book...
Your #6 relay from under the hood (low speed relay). Use a pair of
>>needly nosed pliers to pry back the crimps on the corners, pull the cover
>>off and reinstall. Make sure its not sticking. You can now observe its
>>operation and hear it (you can glue the cover back on later).
>
>I'll have to check that. This morning after Hockey practice it stoped
>running for about five min. now its back to it's tricks
>
Thats VERY interesting. Try pulling the low speed relay, dress the contacts.
Then puul the after run relay (brown one, next to yer noisy one under the
dash). Using small tweaker type screwdrivers to spread the seating, pop is
apart, look at it, say wow, then look for bad solder joints. DON'T move
things around on the board. Slap it back together and reinsert it. Then
throw 50.00 into the air and cross your fingers three times. If that doesn't
work, call Linda...
>>If the idle speed boost works and yer low speed fan relay ain't sticking -
>>its most probly a bad transistor in the after run cooling relay.
>>Unfortunately I haven't gotten around to tearing down my old one to try and
>>trace out the schematic - and it'll probly take me another month or more.
>
>I hope that you have fun.... Thanks for the help so far!
Spent most of the day putting in a plexiglass backboard for Supershots.
Twisted my ankle, pinched one finger, scratched my arm, cut my thumb, and my
back hurts from contorting my way into the back of the durned thing three
times. Came home, bought Key Lime pie and celebrated 9 years of sobriety...
********************************AUDI FAN******************************
EMCM(SW) Dave Head (nuclear grade electrician)
87 5KCSTQ 170K miles and not counting (damned VDO odometers)...
1.9 bar boost (charlie spring, no shim) - @ 1.3 the shuttle launches!
Maitland FL
**********************************************************************