[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]
Re: Hall Sender
- To: 76761.1444@CompuServe.COM, quattro@coimbra.ans.net
- Subject: Re: Hall Sender
- From: STEADIRIC@aol.com
- Date: Tue, 4 Jun 1996 18:10:00 -0400
- cc: cobram@channel1.com, ZAMH43A@prodigy.com, firkins@eis.net.au, Tim.Gortner@pobox.com, mark.hogan@triteal.com, Kurtles@aol.com, johkar@teleport.com, cking@legend.txdirect.net, vikram@mindspring.com, llampman@whidbey.net, eliot@u.washington.edu
- Sender: owner-quattro@coimbra.ans.net
>Anybody now what a hall sender/sensor does ? according to the
>diagnostics flash light mode 2113 on the V8. This sensor has
>a problem.
IT's what the ECU Use's below 1400 rpm to measure crank position it's in
the dist. Try rotating your dist one direction or the other 1/4" MAX and
see if you have the same error code.... If the dist is slightly out of
time WRT the crank pin you will get this code and hard starting.
Later!
Eric Fletcher
'87 5KCSTQIA2RSR2B
St. Louis, MO
STEADIRIC@aol.com