[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]

Hall Sender



Anybody now what a hall sender/sensor does ?  according to the
diagnostics flash light mode 2113 on the V8.  This sensor has 
a problem.

When you use the flashing light method instead of the VAG tool
it wont distinguish between intermittent and consistent failure.

But it does say if there is intermittent failure the code will be erased after
10
starts...... So I started it eleven times..... 2113 is still there.

Before I embark on testing the Hall sensor itself,  I bought a couple of
0-5k ohm potentiometers today.  $1.29 ea. gotta love it.....

I'm going to plug these into the coolant temp sensor harness and dial
up 2.0 ohms and see what happens.

Yup, were having fun now!!!!! :-(

Regards,

Mike L.

P.S.  Don't try running it with out the idle stabilizer disconnected... runs
like crap....

89 100 Avant (in need of a A/C clutch.....)
90 V8 (the surger from hell.......)

==================================================
Mike LaRosa		INCASES Engineering N.A.
Manager,			20 Trafalgar Square
EDA Technical Support	Suite 403
603-881-5392		Nashua, NH
603-881-5467 Fax		03063
E-Mail:  76761.1444@compuserve.com
==================================================