Re: Strut brace for 5KCSTQ!

[rjandrew@post.cis.smu.edu (R Justin Andrews)]

> I did it, sorta.  I have an S4 strut brace on my 5KCSTQ.  I had to
> bend the cross bar around behind the brake master reservoir, but that is
> only temporary until I cna work out a remote reservoir.  Then I'll use a
> straight bar.  It seems to work well, although it isn't one of those night
> and day mods.  Turn in response seems to be alittle quicker.  This is more
> noticable at higher speeds.  It also "feels" a little tighter in the front
> end.  The Eric shocks seem to work better too.
> 
> The bonus is that it wasn't too expensive at all.  The top caps
> that bolt to the =D9top of the strut towers bolt right on, with only sli
> ght
> reshaping with a small hammer.  There are a couple things that need to be
> moved out of the way along the firewall, but even that is trivial.
> 
> Highly recommended overall.
> 
Where is a good source for this brace and how much does it cost??
Will it fit on a 5KS????
Thanks a bunch,
Rich Andrews
rjnadrew@post.cis.smu.edu