'92 S4 headlight protection

[vilr@jupiter.sun.csd.unb.ca (Pierre Villiard)]

Hi Audians,

        Apparently it's not possible to find in Fredericton, New Brunswick,
the thick 3M stuff for lights recently mentioned by Peter Henriksen.
        Someone here suggested two pieces of Lexan sheet (1/16in, clear,
800°F resistant), cut and bent to size and shape, and held right on the
glass with velcro. Though it could possibly do the job, I'm not sure the
looks of it would be great.
        So I would like to know if the following is a good idea. What if
the upper part of the Lexan piece was bent and velcroed on the headlight
casing, i.e. under the hood, and the lower part inserted just in front of
the rubber strip around the bottom of the headlight? That way, no velcro
would show. Any input on this?
        By the way, thanks to Michael Spiers, Andrew Duane, Bill Free, Alan
Stork & David Toppin, re calipers.

Pierre & Lauraine
'92 S4 & '89 100